Industrial Active Harmonic Filters
EN 50160 / IEC 61000 / IEEE 519

GRIDCON® ACF Industrial version is the number one choice for challenging compensation tasks where reliability and safety are needed, for example, even beyond normal operating voltages and under challenging ambient conditions.

(Compliance with the limit values for harmonics in accordance with EN 50160 / IEC 61000 / IEEE 519)

Relative articles:

Description
Characteritics
Advantages
Applications

The GRIDCON ACF Industrial version is a 3 wire Active Harmonic Filter and belongs to the new generation of Active Harmonic Filters GRIDCON ACF. The GRIDCON ACF active filters use a new 3 - level technology. The 3-level circuit of GRIDCON® ACF is based on twelve IGBTs, whereas conventional 2-level active filters only comprise of six. The special circuitry halves the voltage load of the power semiconductors. On the one hand this results in lower losses and on the other hand enables use in grids with a higher rated voltage. The DC link voltage is also higher which allows higher peak currents to be generated, which succeed Low losses and high dielectric strength. Also, it is an expendable device, which with a combination of several cabinets can reach 3 Mvar of needed power. The optimized power electronics enable use in a wide voltage range of less than 380 V to more than 690 V. Given the isolated main cooling duct and low losses, reliable operation is possible under demanding environmental conditions. The modular concept simplifies subsequent expansion or modification, allowing the filters to grow with their tasks. The operator can perform parameterization for new or changed tasks himself, ensuring long-term flexibility. GRIDCON® ACF Industrial version is already prepared for future functionality to compensate harmonics even beyond the 51st.

  • Operation up to 690 V and higher at full power without derating.
  • Rated current can be extended in a modular manner from 125 A to 3,000 A.
  • High power density and compact design.
  • Very low losses advanced IGBT microprocessor circuit, 3 levels technology.
  • Very durable film capacitors.
  • Overvoltage category III up to 1000 V – even in grids with isolated neutral point (IT network configuration).
  • Degree of protection up to IP 54 possible, optional external water cooling for complete encapsulation.
  • Dynamic compensation of reactive power, harmonics, and flicker, as well as load balancing in one unit.
  • Ease of install (plug n’ play) service and operation.
  • Modular design for easy future expansion as needed.
  • Maximum operational reliability in all circumstances.
  • Low losses.
  • Low life-cycle cost.
  • Reducing equipment wear and maintenance instances.
  • Preventing production disruptions.
  • All devices comply at least with the EMC requirements of an industrial environment.
  • Given the isolated main cooling duct and low losses, reliable operation is possible under demanding environmental conditions.
    • Production lines, e.g. automotive
    • Mining
    • Chemical industry
    • Larger printing plants
    • Cranes and transport systems
    • Offshore platforms and ships
    • Oil and gas
    • Paper industry
    • Steel processing
    • Water treatment and pump stations
    • Industrial Active Harmonic Filters
ESPA